The main reason homeowners install a hot water system is to maintain a constant supply of hot water in the home. When the system is installed correctly, you will not have setbacks, such as finding cold water in the shower in the morning or funny-smelling water coming out of your taps.

On the other hand, when there are mistakes during the installation process, you might have to keep calling the plumber because of water damage and unit break down. Here are three pro tips that will ensure that your hot water system is installed correctly.

1. The Location of the System Is Key

First, you should make sure that the unit is as close to the main water outlets where you will use it. Ideally, it should be placed directly outside the bathroom, laundry room, or kitchen. Proximity to the place where the water will be used ensures that you use short pipes and reduce inconveniences, such as pipe bursts or leaks.

The beauty of using shorter pipes in the installation is that once the unit is functional, it will experience much less heat loss than when the pipes are long or when the hot water has to cover a bigger surface area.

2. The Pipes Should Be Insulated

Heat loss is one of the issues that could cost you a lot of energy in reheating tank water. To prevent this unnecessary energy consumption, consider installing insulated pipes to take water to the kitchen, bathroom, and other parts of the house where hot water is needed.

One of the most effective insulators is closed cell rubber. Ask the plumber if they have the material. Also, remember to make sure that all your plumbing work is done by a licensed plumber, and ask to see a compliance certificate beforehand.

3. Hire an Expert for Electrical Installations

The other thing to remember is the importance of proper electrical wiring if you are using an electric unit. You will also need an electrician to install the heating element and the pump. Check whether the electrician you are hiring for the job has the relevant skills and experience.

Also, check the warranty of the unit and its terms and conditions.

Installing a water heater is a task that should be carried out by professionals. It would be better to let a professional handle the installation at a cost than leave the job to inexperienced people and end up with a faulty unit after a short while.

For more information on installing hot water units, reach out to a local plumber.